RasProLink
Turn any Windows PC into a real EtherCAT, EtherNet/IP or PROFINET station. One service, no extra hardware.
Add industrial protocol capability to your own software with just a few lines of code, using the ready-made .NET library.
Request a Demo / QuoteSee FeaturesProtocol Engines
One software, five roles. The active engine is selected in the web interface.
EtherCAT Master
Use your PC as the master of EtherCAT slave devices.
EtherNet/IP Scanner
Establish cyclic I/O connections to adapter devices as an originator.
✔ CIP Safety supportEtherNet/IP Adapter
The PC appears as a target (adapter) to a scanner or PLC.
PROFINET IO-Controller
Scan IO devices, name them via DCP and connect them with GSDML.
✔ PROFIsafe F-Host support (for research and testing)PROFINET IO-Device
Run your PC as an IO device connected to a PLC.
Key Features
Functions that speed up commissioning and make a difference in daily use.
Network scan and DCP
Find PROFINET devices on the line, assign station name and IP, and identify a device by its LED.
GSDML upload
Upload the GSDML file straight from the network scan and connect the device in one step.
Trilingual interface
Fully multilingual web interface in Turkish, English and German.
Windows 7 editions
Separate PROFINET and EtherNet/IP editions for legacy systems.
.NET client library
Control RasProLink from your own application over the HTTP API.
Per-machine license
Each installation runs bound to its licensed machine.
How It Works
Ready in three steps.
Install
Install RasProLink as a Windows service; configuration is done in the browser.
Choose the engine
Select the EtherCAT, EtherNet/IP or PROFINET role in the web interface.
Connect
Scan devices, configure them and start cyclic data exchange.
Documents
Download the manual to get to know RasProLink.
EtherCAT®, EtherNet/IP™, CIP Safety™, PROFINET® and PROFIsafe® are registered trademarks of their respective owners. Logos belong to their respective organizations.
